1.25G~10G XFP/SFP OEO Redundant Transponder
Introduction
The 10G converter enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. ,The redundant multi-rate dual transponder fit HT6000 series CH04, CH08, CH20 chassis.
Key Features
1. 3R signal regeneration
Re-transmission
Re-shaping
Re-timing
2. Multi-rate supports 1Gbps ~ 10Gbps
3. Supports Loopback Test
4. Supports ALS
5. Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
Specification
|
Center Wavelength
|
Compliance with ITU-I standard
CWDM 1271 ~ 1611nm
DWDM 1529.5~1565.50nm
850nm/1310nm/1550nm
|
|
Data Rate (Gbps)
|
Fiber Channel: 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
Ethernet :1G/10G
SONET: OC-24, OC-48, OC-192
SDH :STM-16/64
|
|
3R Regeneration
|
Re-amplification, Re-shaping, Re-timing
|
|
Optical Channel Protection
|
1+1 optical channel protection, switching time＜30ms
|
|
Optical Interface
|
6xSFP+/6xXFP
|
|
NMS
|
TELNET, SNMP, WEB
|
|
Size
|
191 ( W) x 253 ( D ) x 20 ( H ) mm
|
|
Operating Temperature
|
-10℃ ~ 60℃
|
|
Storage Temperature
|
40℃ ~ 80℃
|
|
Relative Humidity
|
5% ~ 95% Non-condensing
|
|
Power Consumption
|
<=30W
|
Applications
Telecom
Data center
5G Network
Long Haul Network
Fiber optical network
OM6000 include the following cards
| NMS management card |
100G QSFP28 to CFP transponder |
2xQSFP28 to CFP2 200G Muxponder |
| 100G Muxponder: QSFP28 ↔ 4xSFP28 |
40G&100G OEO: 6*QSFP28 |
SFP28 25G Quad transponder |
| SFP+ Multi-Rate Quad transponder |
Redundant Multi-Rate Dual transponder |
EDFA Optical Amplifiers |
| Bidi EDFA Optical Amplifiers |
16ch DWDM MUX/DEMUX |
40ch DWDM MUX/DEMUX(AAWG) |
| OLP Optical Line Protector |
DWDM Passive Optical Add/Drop Multiplexers |
DCM card |
DWDM transmission solution
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution
Ordering Information
| Model |
Function |
Protocols |
Client |
line |
| OM6000-OSPLXG6C |
10G Dual Multi-Rate transponder, Converter/Repeater 6XFP interfaces with 3R,
Line-side 1 + 1 redundancy protection |
Fiber Channel : 8 /10Gbps CPRI:CPRI7,
LAN or WAN PHY :10G SONET: OC-192 |
2 x XFP |
4 x XFP |
| OM6000-OSPL1G6C |
1.25G~10G Dual Multi-Rate transponder, Converter/Repeater 6xSFP+ interfaces with 3R,
Line-side 1 + 1 redundancy protection |
Fiber Channel :1/2/4/8 /10Gbps CPRI:2/3/4/5/6/7,
LAN or WAN PHY :1G/10G SONET: OC-24, OC-48, OC-192 |
2 x SFP+ |
4 x SFP+ |
Product Tags:
|
|
1.25G-10G converter XFP / SFP OEO Redundant Transponder Power By Chasssis Images
|
