5 Port Industrial Poe Network Switch DC12/24/48V Input
1SFP+4RJ45 Gigabit Ethernet Switch
Key Features of Voltage Booster Switch
- Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
- 4 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 1 x 10/100/1000Mbps SFP port
- Built-in voltage booster for DC12-48V input which can be used for solar power/Trunk/VoIP system/CCTV security system
- 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX lFlow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
- Max power to 15.4W under af standard, 30W under at standard to each PoE port
- Detect the PoE models of electrical equipments.
- Operating environment temperature:-40 ° ~75 ° c
Specificaiton of 5port Gigiabit Poe Switch
| Product Name | 10/100/1000Mbps Industrial POE Network Switch (1F+4TP) |
| Model No. | IM-WP144BGE |
| Port | 1 x 1000Mpbs SFP port
SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode:storage and forward
System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network,fiber |
| Power supply | POE power supply input voltage: DC12V-48V Single PoE power supply output power: 15.4W (port 1~4) (802.3at standards required special instructions) |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell Safety class:IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method:Din-rail mounting |
| Warranty | 3 years |
Application
Packing List:
| PACKING LIST | CONTENT | QTY | UNIT |
| 5 port Voltage Booster Switch | 1 | SET |
| User Manual | 1 | PC |
| Removable Terminal Block | 1 | PC |
| Note: Industrial Switch does not include the power supply and SFP module. |
FAQ:
1. Q: How does this Industrial 5 Ports Gigabit POE+ Network Switch compare to other standard POE switches?
A: This 5port PoE switch features a built-in voltage booster which enables it to utilize a power input range of 12-48VDC, whereas typical POE switches support 48VDC input only.
2. Q: Does this industrial 5 ports PoE switch support 24VDC power output?
A: No, this product doesn't support passive 24VDC PoE devices, and it supports standard IEEE802.3af/at PoE 48VDC devices only.
3. Q: Is it a managed industrial network switch?
A: It is unmanaged industrial network switch and no need any setting. It is plug and play, easy to use.
4. Q: What's is the PoE Pin Assignment of this Industrial 5 Ports POE+ Network Switch?
A: It supports both 1/2 (V+),3/6 (V-) and 4/5 (V+),7/8 (V-).
5. Q: Can i use it with one Non-PoE devices?
A: Yes, sure. If one Non-PoE devices is connected with this industrial 5port PoE switch. The industrial 5port PoE switch willprovide data only, and don't provide power any more.
|
|
5 Port Industrial Poe Network Switch DC12/24/48V Input 1SFP+4RJ45 Gigabit Ethernet Switch Images
|
